My Account
My Shopping Cart
Burette Clamp - Single Coated Jaws - Image one
Share this product:
Item#: 14133
![5 star rating]()
4 customer reviews
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
![5 star rating]()
K.P. from South Pasadena, CA
Perfect for my needs.
![5 star rating]()
Michael Donoghue from Austin, Texas
Works as advertised. Getting the wing nut(s) tight enough takes some effort. A bit thicker padding at the burette give you more contact surface and a bit stiffer grip.
![5 star rating]()
James Wilson from Morganton Ga.
I used a short section of 1/4 in aluminum plate drilled and tapped it to match the screw part of the clamp, and fastened it to the wall near my work station. I made another bracket, with rubber grommet mounted below. It keeps my burette safely out of the way.
![5 star rating]()
Love the clamps
Shanon from San Jose, CA USA
Clamps are great and arrived on time!
4 customer reviewsThe coated jaws on this burette clamp provide a secure grip. Includes a cast-aluminum clamp and nickel-plated thumbscrew. The clamp will accept a tubing range of 3/8" to 1 3/8" in diameter. A must-have for any laboratory!
Features:
- Burette clamp with coated jaws
- Cast-aluminum clamp and nickel-plated thumbscrew
- Tubing range for 3/8" to 1 3/8" diameter
- Good for a laboratory or classroom setting
Age:
14 +
14 +
Approx. Ship Size:
6.75 x 2.00 x 1.00 inches
17.15cm x 5.08cm x 2.54cm
6.75 x 2.00 x 1.00 inches
17.15cm x 5.08cm x 2.54cm
Weight:
0 lb 4 oz
0.11 kg
0 lb 4 oz
0.11 kg
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Customer Reviews
K.P. from South Pasadena, CA
Perfect for my needs.
Michael Donoghue from Austin, Texas
Works as advertised. Getting the wing nut(s) tight enough takes some effort. A bit thicker padding at the burette give you more contact surface and a bit stiffer grip.
James Wilson from Morganton Ga.
I used a short section of 1/4 in aluminum plate drilled and tapped it to match the screw part of the clamp, and fastened it to the wall near my work station. I made another bracket, with rubber grommet mounted below. It keeps my burette safely out of the way.
Love the clampsShanon from San Jose, CA USA
Clamps are great and arrived on time!
