Account
Shopping Cart
Single CR2032 Battery Holder with Leads - 3V
Share this product:
Item#: 17210
![5 star rating]()
8 customer reviews
![5 star rating]()
Works Great in Amateur Radios
Bob Byrne SR from Newton, MS
First to let you know, I'm a HAM radio operator, and I was looking for a replacement battery for my small hearing aid sized battery that was also soldered onto the board, for a larger one like the CR2032 that would fit into a holder so when it died it could be replaced without having to un-solder and solder it back in. I found your holder online and knew it would fit the bill. I now plan to install it in all my radios because it worked so well for the first radio!. Thanks for a great product!
![5 star rating]()
Great replacement
Joe T
I have 2 Halloween decorations that had a similar power source to light up the eyes. The original ones no longer had good battery contact. These holders were easy to install and had good battery contact allowing the eyes to remain lit. .
![5 star rating]()
Works perfect
Jason from Webster, NY
The holder powers 10 3V led lights on the train set and works well
![5 star rating]()
single battery holder with leads.
ROBERT K. from Marshall mi.
This single battery holder with leads will work, great with my icom 7000 clock and it keeps time with no problem, alot of ic7300 owners are using the same battery holder for the same purpose, I highly recommend them 73!
![5 star rating]()
Alfred from Tennessee
Worked PERFECT!!
![5 star rating]()
Arrived Quickly, Well-Packaged & High Quality
Kenneth from USA, TX, San Antonio
I purchased this holder to install a replaceable battery in a vintage electronic word processor that had the battery soldered to the motherboard. The holder fit perfectly, and the pre-tinned leads made it easy to install.
![5 star rating]()
5 stars
Neal from Cecilia,Louisiana
Ordering process was painless and received item n a timely manner. I received item in good working condition. I am very satisfied and will be a repeat customer.
![5 star rating]()
Good Product
John from Port Washington, OH
These was what I needed to repair my amateur radios, the memory battery. Worked great
8 customer reviewsThis single CR2032 3V output battery holder is excellent for many different hobby or science projects, especially for brush bots. It comes with 6 inch (15 cm) long red/black wire leads for easy hook-up and an on/off switch.
Features:
- Single CR2032 cell battery holder with 3V output
- On/off switch
- 6 inch (15 cm) long wire leads
- Great for use in electronics applications and small hobby projects like brush bots
Age:
14 +
14 +
Approx. Ship Size:
1.50 x 1.00 x 0.25 inches
3.81cm x 2.54cm x 0.64cm
1.50 x 1.00 x 0.25 inches
3.81cm x 2.54cm x 0.64cm
Weight:
0 lb 1 oz
0.00 kg
0 lb 1 oz
0.00 kg
Warning:
CHOKING HAZARD
Small parts. Not for children under 3 yrs.
EXPLOSION & FIRE HAZARD
Accidentally shorting (connecting the red and black wires) of any battery holder with batteries installed can result in fire and battery explosion!
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
CHOKING HAZARD
Small parts. Not for children under 3 yrs.
EXPLOSION & FIRE HAZARD
Accidentally shorting (connecting the red and black wires) of any battery holder with batteries installed can result in fire and battery explosion!
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Customer Reviews
Works Great in Amateur RadiosBob Byrne SR from Newton, MS
First to let you know, I'm a HAM radio operator, and I was looking for a replacement battery for my small hearing aid sized battery that was also soldered onto the board, for a larger one like the CR2032 that would fit into a holder so when it died it could be replaced without having to un-solder and solder it back in. I found your holder online and knew it would fit the bill. I now plan to install it in all my radios because it worked so well for the first radio!. Thanks for a great product!
Great replacementJoe T
I have 2 Halloween decorations that had a similar power source to light up the eyes. The original ones no longer had good battery contact. These holders were easy to install and had good battery contact allowing the eyes to remain lit. .
Works perfectJason from Webster, NY
The holder powers 10 3V led lights on the train set and works well
single battery holder with leads.ROBERT K. from Marshall mi.
This single battery holder with leads will work, great with my icom 7000 clock and it keeps time with no problem, alot of ic7300 owners are using the same battery holder for the same purpose, I highly recommend them 73!
Alfred from Tennessee
Worked PERFECT!!
Arrived Quickly, Well-Packaged & High QualityKenneth from USA, TX, San Antonio
I purchased this holder to install a replaceable battery in a vintage electronic word processor that had the battery soldered to the motherboard. The holder fit perfectly, and the pre-tinned leads made it easy to install.
5 stars Neal from Cecilia,Louisiana
Ordering process was painless and received item n a timely manner. I received item in good working condition. I am very satisfied and will be a repeat customer.
Good ProductJohn from Port Washington, OH
These was what I needed to repair my amateur radios, the memory battery. Worked great
